30 Gallon Breeder Fish Tank: Dimensions, Weight, Heater and Fish

A standard 30 gallon breeder tank measures 36 × 18 × 12 inches (91 × 46 × 30 cm). Set up, it holds about 26 gallons (97 liters) of real water and weighs about 315 lb (145 kg). Every number below is worked out for this exact tank.

Outside size (L × W × H)
36 × 18 × 12 in91 × 46 × 30 cm
Label volume
30 gallons114 liters
Real water, set up
26 gallons97 liters
Empty weight
25 lb12 kg
Filled weight, about
315 lb145 kg
Heater, normal room
150 W

What is a 30 gallon breeder tank good for?

The 30 breeder is wide and low, with a three foot by 18 inch floor. It is made for breeding and for bottom-loving fish such as corydoras, rams and shell dwellers.

How much water does it really hold?

The label says 30 gallons (114 liters). That is the tank filled to the very brim, measured from outside the glass. In real life the glass, the gap at the top, the gravel and the decor take up room. A set-up 30 gallon breeder tank holds about 26 gallons (97 liters). Use that smaller number when you dose medicine or water conditioner. Work out your exact water volume

How much does a 30 gallon breeder tank weigh?

An empty glass 30 gallon breeder tank weighs about 25 lb (12 kg). Filled, with gravel and a few rocks, it weighs about 315 lb (145 kg). That is as much as two or three adults, so use a stand made for aquariums, not ordinary furniture. The load on the floor under the tank is about 70 lb per square foot (340 kg/m²). Add your own stand and rocks

What size heater does it need?

The colder your room, the bigger the heater. These sizes hold the water at 78 °F (25.5 °C), right for most tropical fish.

Your roomHeater to buy
Warm room, 73 °F (23 °C)75 W
Normal room, 68 °F (20 °C)150 W
Cold room, 63 °F (17 °C)200 W

Check your own room and target temperature

What size filter does it need?

For a community tank, look for a filter rated at 100–150 GPH (400–600 L/h). That moves all the water through the filter four to six times an hour. Goldfish and big cichlids need more. Size a filter for your kind of tank

How much gravel or sand?

DepthGravelSand
1 in (2.5 cm)35 lb16 kg37 lb17 kg
2 in (5 cm)70 lb32 kg74 lb34 kg
3 in (7.5 cm)104 lb48 kg111 lb51 kg

Two inches suits most tanks. Rooted plants like three. Work it out in bags

How much water to change

A normal weekly water change is a quarter of the water: about 6.4 gallons (24 liters) for this tank. A big clean-up change is half: about 12.8 gallons (48 liters). Plan changes from your nitrate reading

How many fish can go in a 30 gallon breeder tank?

It depends on which fish. The table shows how many of each the tank carries comfortably if that fish is the only kind in the tank. If you mix kinds, keep fewer of each.

FishHow manyKeep at least
Neon tetraup to 246
Guppyup to 133
Bronze corydorasup to 106
Zebra danioup to 176
Mollyup to 53
Tiger barbup to 98
Pearl gourami11
Bristlenose pleco11
Dwarf neon rainbowfishup to 116
Fancy goldfish11

Build your own fish list for this tank

Fish that need a bigger tank

These fish are often sold for tanks this size, but they outgrow it:

  • Common goldfish: grows to 12 in (30 cm) and needs at least 75 gallons (284 liters).
  • Oscar: grows to 12 in (30 cm) and needs at least 75 gallons (284 liters).
  • Common pleco: grows to 16 in (40 cm) and needs at least 150 gallons (570 liters).
  • Bala shark: grows to 14 in (35 cm) and needs at least 150 gallons (570 liters).

Questions and answers

What are the dimensions of a 30 gallon breeder tank?

A standard 30 gallon breeder glass tank is 36 × 18 × 12 inches (91 × 46 × 30 cm), measured on the outside as length × width × height. Brands differ by up to half an inch.

How much does a 30 gallon breeder tank weigh?

Empty, about 25 lb (12 kg). Filled with water, gravel and rocks, about 315 lb (145 kg). Add the weight of the stand to find the load on your floor.

What size heater does a 30 gallon breeder tank need?

In a normal room at 68 °F (20 °C), 150 W holds 78 °F (25.5 °C). In a cold room use 200 W; in a warm room 75 W is enough.

How many fish can I put in a 30 gallon breeder tank?

It depends on the fish, not just the gallons. As the only kind in the tank, a 30 gallon breeder tank carries about 24 neon tetras, or 13 guppies, or 10 bronze corydoras. Mixed tanks hold fewer of each.

How many liters is a 30 gallon breeder tank?

30 US gallons is 114 liters. Once set up with gravel and decor, the tank holds about 97 liters (26 gallons) of water.

Other tank sizes

Dimensions are the common North American and European standard sizes; brands differ slightly. Weights assume standard glass of typical thickness, 4 cm of gravel and light rockwork. How we calculate